HighPoint RocketRAID 2210 - Manual (Page 59)

Linux Driver Support
5-9
# umount /mnt/initrd
# gzip -c /tmp/initrd.ext2 > /boot/initrd-xxx.img
If you are using lilo to boot the system, use “lilo” to reinstall the RAM disk:
# lilo
Update rr2210.o in /lib/modules:
# cp /tmp/rr2210.ko /lib/modules/‘uname –r‘/kernel/drivers/scsi/rr2210.ko
Reboot your system to allow the new driver take effect.
4 - Uninstalling the Driver
To uninstall the RocketRAID 2210 driver
Note: The driver cannot be uninstalled while the system is booted from a disk or array
attached to the RocketRAID 2210.
To uninstall the driver, remove the lines added to /etc/fstab, and remove the files
created in the /etc/init.d directory.