Auto Page RS-855lcd - Manual (Page 21)

21
Vibration Mode
Remote Control vibrates
when the system is
triggered
Button Lock
Disable the transmission
function temporarily
Driver paging
Someone is paging you
in front of your vehicle
Low Battery
You have to replace the
battery of remote control.
E. PROGRAMMING OF THE LCD REMOTE TRANSMITTER:
Transmitter Button Description Operation
(1 second)
LCD screen lamp turns on
for
5 seconds. Press and hold for 1 second
1 melody sound to confirm
enters.
(3 seconds)
Timer Programming Mode. Press and hold for 3
seconds
2-melody sounds to confirm
enter.
(5 seconds)
Power Save Mode Press and hold for 5
seconds
1 melody sound to confirm
enters.
- -
Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter Press within 3 seconds
- (2-second)
Button Lock ( ) enable /
disable
Press within 3 seconds
-
(2-second)
Melody / Vibration ( )
Mode
Press within 3 seconds
-
(2-second)
Program Count Down Timer
( ) (10-Minute / 20M / 30
M /1Hour /1.5H / 2.0H)
Within 3 seconds press the
button until desired
time is set, then flashes
-
(2-second)
Enable / Disable Bi Sound
(Bi) While Pressing Button
1. Screen Lamp ON: Press and hold the button one second, with one
melody sound and the LCD
screen lamp will turns on for 5 seconds
2. Power Save Mode: While the power save mode, the LCD remote
transmitter uses “0” current to save the battery power.