Auto Page RS-855lcd - Manual (Page 5)

5
+
Channel # 5 Timer Output (5)
+
Channel # 6 Timer Output (6)
LCD DISPLAY TRANSMITTER OPERATION ONLY:
Transmitter Button System Function Remark
- (C)
System’s Trigger Record
Check
Press within 3 seconds
- -
(C)
System’s Status Check Press within 3 seconds
- ( )
Button Lock
Press within 3 seconds and
Hold
button for 2 seconds
-
( )
Optional Driving Pager Press within 3 seconds
-
( )
Monitor Indoor Temperature Press within 3 seconds
-
( )
Daily Timer Start Press within 3 seconds
LCD screen lamp turns on for
5 seconds.
Press and hold for 1 second
- -
Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter
Press within 3 seconds
Warning: Press the button two times when the battery
compartment is empty, then insert the new battery.
B. BUTTON LOCK:
It is useful if you want to disable the transmission function of the remote
control temporarily to prevent from any inadvertent pressing of buttons by
others.
1. The XT-85s Standard transmitter:
Press the button first, within 3 seconds press and hold the ( )
button for 2 seconds to activate or cancel the button lock function. The “Red
LED” will pause flash for few seconds to indicate the remote control
transmitter is on “Button Lock” mode when pres sing the transmitter button.
2. The 2-way LCD transmitter:
Press the button first, within 3 seconds press
and hold the ( ) button for 2 seconds to activate
or cancel the button lock function.
The icon will be displayed on the LCD screen to
confirm that the LCD remote transmitter is in the
“Button Lock
” mode.
C. LED display:
LED Function LED Function
Off Disarmed Zone 1 / Warn-Away Trigger
Slow Armed 2 flashes... Zone 2 / Trigger on Trunk/Hood