Auto Page RS-855lcd - Manual (Page 22)

22
Entry: 1. Press & hold the button for 5 seconds, with one
melody sound and icon on the LCD screen to indicate
entry the “power save mode”.
2. Under the “Active Arming Mode” and Disarm mode. Turn the
ignition switch to on, the LCD remote transmitter will automatically
entry the “Power Save Mode”
Exit: Press any button of the LCD remote transmitter to exit the
“Power Save Mode”.
3. Clear the Flash Icon and Melody Sound: Press the button 3
times within 3 seconds will clear the
flash icon and melody sound on the LCD screen transmitter
4. Stop The Trigger Melody Sound: While triggering the alarm the LCD
screen will alert user through melody sound and flashing trigger icon, press
any button on the LCD remote transmitter to stop melod y sound only.
5. Button Lock: It is useful if you want to disable the
transmission function of the remote control temporarily to
prevent from any inadvertent pressing of buttons by others.
Press the button first, within 3 seconds press and
hold the ( ) button for 2 seconds to activate or cancel
the button lock function, the icon will displayed on the
LCD screen to show the LCD remote transmitter is on
“Button Lock”.
6. Vibration / Melody Mode:
It is useful when you are in a noisy place and difficult to hear
beep sound from the remote control. The remote control in
this mode will vibrate when your security system is
triggered.
Press the button first, within 3 seconds press and
hold the ( ) button for 2 seconds to select the mode
of vibration or melody, the icon will displayed
on the LCD screen to show the LCD remote transmitter is
on vibration mode.
7. Enable / Disable Bi Sound While Pressing Button:
It has a short “bi” sound while pressing the button of the LCD screen
transmitter
If you want mute the “bi” sound mute always while press button. Press the
button first, within 3 seconds press and hold the (Bi) button for 2
seconds to disable the “bi” sound.