AT&T EXPANSION EP5632 User Manual

Page 14

Advertising
background image

Appendix



• Make sure the ringer is on.

• Make sure the telephone line cord and power adapter are

plugged in properly.

• The cordless handset may be too far from the telephone

base. Move it closer to the telephone base.

• There may be too many extension phones on the telephone

line to allow all of them to ring simultaneously. Try

unplugging some of them.

• If the other telephones in your home are having the same

problem, the problem is in the wiring or local service.

Contact the local telephone company (charges may apply).

• Other electronic products can cause interference to your

cordless telephone. Try installing your telephone as far away

as possible from the following electronic devices: wireless

routers, radios, radio towers, pager towers, intercoms, room

monitors, televisions, VCRs, personal computers, kitchen

appliances, and other cordless telephones.

• Test a working telephone at the telephone jack. If another

telephone has the same problem, the problem is in the

telephone jack. Contact your local telephone company

(charges may apply).

• The telephone line cord might be malfunctioning. Try

installing a new telephone line cord.

• Re-install the battery and place the cordless handset in the

telephone base.

• Wait for the cordless handset to synchronize with the

telephone base. To be safe, allow up to one minute for this

to take place.

The
telephone
does not
ring when
there is an
incoming
call.

Advertising
This manual is related to the following products: