AT&T EXPANSION EP5632 - Manual (Page 7)

4
Getting started
Adding your new handset
Before using a newly purchased handset (EP562), it must be
registered with the telephone base. If you already have 2
handsets registered to the same telephone base and you wish to
replace your newly purchased handset with another, see page 5.
2:00AM
Place in
Charger
2:00AM
Register handset:
Press MENU in the
base. Find 'Register
Handset' in the main
menu. Press SELECT.
2:00AM
Registration
in progress...
Before registering an additional handset
(EP562), make sure that the handset
battery is installed and charged.
To register a new handset:
. Place the unregistered handset in the
telephone base or charger.
2. Press the MENU softkey on the
telephone base while in idle mode.
3. Press the UP and DOWN Navkeys to to to
highlight Register Handset, then press
the SELECT softkey.
• Registering Handset will appear
on the telephone base display.
• Registration in progress... will
appear on the handset display.
• The registration process may take
up to 90 seconds to complete.
When the registration is complete, the
newly registered handset will be assigned
the next available handset registration
number. For instance, if you already have
HANDSET 1 and HANDSET 2, the next
registered handset will be
HANDSET 3.
If you experience difficulty registering
a handset, see the
Troubleshooting
section on page 9.
Register Handset