AT&T EXPANSION EP5632 - Manual (Page 8)

5
Getting started
Replacing a handset
When you are replacing rather than
adding a handset, for your handsets to
be numbered sequentially, you need to
delete all the handset registrations on
the telephone base.
To delete all the handset registrations:
. Press the MENU softkey on the
telephone base in idle mode to enter
to the main menu.
2. Press the UP and DOWN Navkeys to
select Settings, then press the SELECT
softkey to enter the Settings menu.
3. Press the UP and DOWN Navkeys
to highlight Delete Handsets, then
press the SELECT softkey. The screen
will show Delete Registration of all
handsets?
4. Press the YES softkey.
After deleting the registrations of all
handsets, you will need to individually
register each handset with the telephone
base (see page 4 for registration
instructions).
Settings
Clear Voice Mail
Default Settings
Delete Handsets
SELECT
Delete Handsets
Delete Registration
of all handsets?
YES NO
NOTE: After deleting After deleting
the handset registrations,
each handset will reset and
Place in Charger will appear
on the handset display.
NOTE: If you replace
a registered handset,
the new handset will
be assigned the next
available registration
number, rather than the
handset number of the
handset you will replace.