Agilent Technologies InfiniiVision 6000 Series - Manual (Page 11)

11
Quickly pan and zoom for analysis with
MegaZoom III’s instant response and
optimum resolution.
QuickMeas shows up to four automated
measurements with the push of a button.
QuickPrint automatically prints your screen or
saves screen images to a connected USB storage
device with automated file names.
Standard serial triggering includes CAN, I 2 C, LIN,
SPI, and USB.
Standard analog HDTV/EDTV triggering supports
triggering on 1080i, 1080p, 720p, 480p HDTV/EDTV
standards.
AutoProbe interface automatically configures the
attenuation ratio of the probe and provides probe
power for Agilent’s active probes (available on
300 MHz - 1 GHz models only).
Built-in help in six languages. Simply press and
hold the front-panel key of interest for a few
seconds, and a help screen pops up to explain
its function.
Maximum sample rate and resolution is achieved
on every measurement. The scope automatically
adjusts memory depth as you use it, so you get
maximum sample rate and resolution on every
measurement. You don’t even have to think about it.
2 or 4 scope and 16 logic channel MSOs allow
you to view and trigger on up to 20 time-aligned
signals on your scope screen.
Built-in storage compartment allows you to
store probes and power cord for easy access
and transportation.
Autoscale lets you quickly display any active
signals, automatically setting the vertical,
horizontal and trigger controls for the best display,
while optimizing memory.
Dedicated front-panel controls make it easy to
access the most common scope controls, including
vertical and horizontal scaling.