Agilent Technologies InfiniiVision 6000 Series - Manual (Page 9)

9
Other standard features
• Built-in help at your fingertips
An innovative built-in help
system in six different
languages (English, Japanese,
simplified Chinese, German,
French and Russian) gives you
quick access to the help you
need. If you have a question
about a particular feature,
simply press and hold the
corresponding front-panel key
for a few seconds, and a help
screen pops up to explain its
function. You’ll no longer have
to look for the manual when
you need assistance setting up
scope functions or making
complex measurements.
• Deep memory transfer over the bus
Transfer all of your data over
the bus, even when using deep
memory. Typically it takes less
than 5 seconds to transfer
4 MB of data over USB.
• Easy software upgrades The
system software is stored
in Flash ROM that can be
upgraded easily from the
scope’s built-in USB port.
For a free copy of the system
software and the IntuiLink
Data Capture software, visit
the 6000 Series Web site at
www.agilent.com/find/
MSO6000sw.
• AutoProbe interface, featured
on 300 MHz - 1 GHz models,
automatically sets probe
attenuation factors and provides
power for selected Infiniium
active probes supporting the
award-winning 1130A 1.5 GHz
InfiniiMax differential active
probe and 1156A 1.5 GHz
single-ended active probe. The
100 MHz 6000 Series offers
auto probe sense only.
• Waveform math with FFTs
Analysis functions include
subtract, multiply, integrate,
and differentiate, as well as
FFT (fast Fourier transforms).
• 250-ps peak detect on the
500 MHz/1 GHz models, 500-ps
peak detect on the 300 MHz
models and 1-ns peak detect
on the 100 MHz models means
you won’t have to worry about
missing narrow glitches.
• Autoscale lets you quickly
display any active signals,
automatically setting the
vertical, horizontal and trigger
controls for the best display.
• Easy printer connectivity Use the
standard USB host port on the
rear panel to easily connect
HP Deskjet, Officejet and HP
PCL 3.0 compatible printers.
• Built-in 5-digit hardware counter
measures frequency up to the
bandwidth of the scope (max
1 GHz). The counter resolution
can be increased to 8 digit with
an external 10 MHz reference.
• Built-in 10 MHz reference in/out
port lets you synchronize
multiple measurement
instruments in a system or get
higher accuracy time base using
a high accuracy external clock.
• Trig Out port on the rear panel
provides an easy way to
synchronize your scope to other
instruments. Use the scope’s
Trig Out port to connect your
scope to a frequency counter
for more accurate frequency
measurements or cross trigger
other instruments.
• High resolution mode offers
up to 12 bits of resolution
in real-time (single-shot)
modes, reducing noise. This
is accomplished by serially
filtering sequential data points
and mapping the filtered results
to the display when operating
at slow time base ranges.
Figure 12. Press and hold any key for built-in Help,
such as this description of the I
2 C bus triggering.
Figure 13. Built-in hardware counter allows for
making 8-digit frequency measurement using an
external 10 MHz reference input.