Airlink APSUSB1 - Manual (Page 2)

Step 1 Connect one end of the Ethernet cable to the RJ-45 port of the Print Server
and attach the other end of the cable to a hub/switch/router. See Fi g. 1.1
Step 2 Make sure the printer is powered OFF, then connect one end of the USB cable
to the USB port of the Print Server and attach the other end of the cable to the USB
port of the printer.
Step 3 Turn ON the printer.
Step 4 Plug one end of the power cord into the Print Server and the other end into an
electrical outlet.
Connecting the Print Server to your network
Section 1
Warning: Do not plug the power cord to the Print Server until you have reached Step 4.
Fig. 1.1