For windows 95/98/me – Airlink APSUSB1 User Manual
Page 4
Advertising
For Windows 95/98/ME
Step 1
Go to Start, Settings, Control
Panel, and double-click the Network icon.
Step 2
Select TCP/IP and click
Properties. See Fig. 2.3
Fig. 2.3
Step 4
Select Specify an IP address and
enter an IP address of 192.168.1.x (where
x is a number between 2 ~ 253 and is not
currently assigned to any device on your
network).
Step 5
Enter 255.255.255.0 for the
Subnet mask. See Fig. 2.4
Step 6
Click OK and OK again.
Step 7
Restart the computer if you are
prompted to do so.
Step 8
Go to Section 3, Accessing the
Web Configuration Utility.
Fig. 2.4
Step 3
Write down your current network
settings including IP Address and Subnet
Mask on a piece of paper. You will need
these information after you have set up the
print server in Section 3.
Advertising