Airlink APSUSB1 - Manual (Page 6)

Step 5 Click on TCP/IP Protocol under
Configuration. See Fig. 3.4
Step 6 You can manually assign an IP ad-
dress and subnet mask to allow the Print
Server to be on the same subnet as your
network, or you can choose to obtain an IP
address automatically by RARP, BOOTP,
or DHCP.
Fig. 3.4
Note: This Installation Guide uses the
default IP address as an example.
Step 7 Write down on a piece of paper the
IP address for the Print Server you want to
use. Be sure to click Save when you are
done configuring the settings.
Step 8 Close the web browser.
Section 4
Adding Printer
For Windows 2000/XP
Step 1 Go to Start, Settings, Printers.
(Printers and Faxes for XP) and select
Add Printer.
Step 2 Click Next at the Add Printer Wiz-
ard.
Step 3 Select Local Printer, uncheck the
Automatically detect and install my
Plug and Play printer check box, and
click Next. See Fig. 4.1
Fig. 4.1
Step 9 If you have changed your
computer’s IP address in order to access
the web configuration utility, you can now
change the settings back to your original
settings.