High Country Tek MVP-R Series - Manual (Page 10)

021-MVP-R Rev A MVP-R User Manual 10
Copyright © High Country Tek, Inc. – 2013
MVP-R
Ramping Controller
Parameter List
The following table outlines the MVP-R parameters as well as the limits and units of measure for each parameter.
Parameter Limits Units
MVP-RPx-xxx Version #
Ramp time factor X1, /10 Mode #
Ramp up time 0.0 to 120.0 Seconds
Ramp down time
*
0.0 to 120.0 Seconds
Minimum output 0 to 600
**
mA
Maximum output 0 to 600
**
mA
Dither frequency 80 to 300,
(select OFF for 1000Hz)
Hz.
Output current mA
Supply voltage Volts
Fault status Fault
*
RP2 only
**
0 to 1.2A for –12A version, 0 to 2.5A for –25A version