Summers 3-Rank Superweeder - Manual (Page 16)

2-4
more information.
WING TUBE JACK BRACKET
Harrows without sprayers on hitch may require the transport wheel assemblies to be positioned further ahead to provide a
better balance on the hitch. A wing tube jack bracket is provided with all machines and allows for mounting the hitch jack on the
wing tube for added stability. (See Fig. 6).
CABLES
Install cable brackets and cable assemblies as shown in figures 1, 2 and 7. Secure brackets using 3/4” U-bolts, lock washers
and nuts. Two cables are required for each wing on the hinged wing models.
To prevent outside cable from catching on transport tire on 112’
Culti-Harrows, install cable guides directly behind transport tire
as shown on page 8-10.
NOTE: Adjust cables so wings slightly lead center when
standing in field position.
IMPORTANT: On machines with two cables per wing, the
cables must be adjusted to have equal tension.
SECTION 2 – SET-UP INSTRUCTIONS — CULTI-HARROW
Fig. 6 Wing Tube Jack Bracket
Fig. 7 Mounting Cable Pull Clamps