Summers 3-Rank Superweeder - Manual (Page 12)

SECTION 1 - SAFETY
1-8
GENERAL ASSEMBLY SAFETY PRACTICES
YOU ARE RESPONSIBLE for the safe as-
sembly of the machine.
DO NOT ALLOW CHILDREN or other un-
authorized persons within the assembly
area.
WEAR PERSONAL PROTECTIVE
EQUIPMENT which includes a hard hat,
eye protection, work gloves and steel toed
boots with slip resistant soles.
DO NOT MODIFY the equipment or sub-
stitute parts in any way. Unauthorized modi-
fication may impair the function and/or
safety of the machine.
USE SUITABLE LIFTING DEVICE for
components which could cause personal
injury.
BLOCK UP ANY RAISED PART of the
machine. Be sure machine is stable
after blocking.
ALWAYS INSPECT LIFTING CHAINS
AND SLINGS for damage or wear.
BE SURE LIFTING DEVICE IS
RATED TO HANDLE THE WEIGHT.
STOP ENGINE, place all controls in
neutral, set parking brake, remove ig-
nition key and wait for all moving parts
to stop before serving or adjusting.
BE SURE PRESSURE IS RELIEVED
from hydraulic circuits before servic-
ing or disconnecting from tractor.
USE EXTREME CARE when servic-
ing or adjusting.
GENERAL ASSEMBLY INSTRUCTIONS
1. READ AND UNDERSTAND Operator’s Manual before assembly of machine.
2. Reference to “RIGHT” and “LEFT” is determined when machine IS VIEWED FROM THE REAR.
3. Reference to “FORWARD” means TOWARDS THE TRACTOR.
4. Reference to “REAR” means AWAY FROM THE TRACTOR.