Electrix Warp Factory User Manual
Page 11
SETUP 2: MIXER WITH AUX SENDS
3. PERFORMANCE GUIDE
T
his setup requires a mixer that features auxiliary (aux) send and return capabilities.
All audio sources are connected directly to the mixer channel inputs. WarpFactory is fed its
Source and Formant signals from the mixer’s aux sends.
The primary advantage of this setup is that it allows for any or all of your sound sources to be
routed to the source or formant input. The Effect Mix control should be set to 100% wet in
order that the dry source signal is only heard through the mixer.
If the mixer has enough aux sends you can create some interesting sounds by sending one source
(or mix of sources) to WarpFactory’s left input and another to the right.
Aux 2 Out
Mic in
Line in
Line in
Aux 1 Out
Aux In
Phono in
3.1