Electrix Warp Factory - Manual (Page 6)

7
English
WHAT TO DO
S
elects Formant Input. “Ess On” will give you a Vocoder effect.
“Ess Off” is better for modulating music with another music source.
Auto mode needs no formant input.It routes the source input to
the formant input as well.
A
djust the mic gain until the
“Optimum” LED lights solid when
speaking into the microphone.
H
igh Band works best
for most types of music.
Low Band is better
for effecting drums and
bass.
F
reezes the vowel/Warp soun
while allowing tweaking wi
the other contro
I
ntroduces boadband noise to the source
signal.
E
ffects the Resolution of the Warp
effect from clearer to granular
I
ntroduces a synth waveform to t
source input. Try this with the MIC inp
and no music for the classic Vocoder sound.
W
orks like an automatic gate for th
mic input. When source kill is
engaged, WarpFactory will only
pass sound while there is a
formant input.
G
reen and orange indicate optimu
source levels, red means that the input
being overdriven to clippin
1.2