ATEN CS-72M - Manual (Page 13)

Auto Scan Mode
The CS-72M’s Auto Scan feature automatically switches
between the two ports at regular 5 seconds intervals so that
you can monitor the computer activity without having to take the
trouble of switching yourself. To invoke Auto Scan Mode hold
down both Port Selection buttons for 3 seconds (see p. 4).
Once scanning begins, it continues until you exit Auto Scan
Mode by pressing either Port Selection switch or the keyboard
Spacebar.
If you exit by pressing a Port Selection switch, the KVM focus
switches to its corresponding port. If you exit by pressing the
Spacebar, the port that had the focus when the scanning
stopped keeps the focus.
Note: While Auto Scan Mode is in effect, ordinary keyboard
and mouse functions are suspended. You must exit Auto
Scan Mode to regain normal control of their use.
- 11 -
2003-08-01