ATEN CS-72M - Manual (Page 6)

Components
Front View:
1. Port Selection Switches
M
Press a switch to give the KVM focus to the system
attached to its corresponding port.
M
Pressing Buttons 1 and 2 simultaneously for 3 seconds
starts Auto Scan Mode (see p. 11). While in Auto Scan
Mode, pressing either button exits Auto Scan Mode and
switches the KVM focus to its corresponding port.
2. Port LEDs
The Port LEDs are built into the Port Selection Switches. A lit
LED indicates that its corresponding Port is the one that has
the KVM focus. Depending on the Port’s status, the LED
may flash according to a specific pattern (see the table on p.
12 for details).
3. Keyboard Port
4. Mouse Port
5. Stand
The stand allows the CS-72M to stand upright on the desktop.
- 4 -
1 & 2
3
4
5
2003-08-01