ATEN CS-72M - Manual (Page 9)

Connecting Up
To connect up the unit, refer to the diagrams on pages 8 and 9
as you do the following:
1. Plug your keyboard and mouse into their respective
connectors on the CS-72M’s front panel.
2. Plug your monitor, microphone, and speakers into their
respective connectors on the CS-72M’s rear panel.
3. Use the custom KVM cables (described in the Cables
section on p. 3), to connect the CS-72M CPU Ports to the
monitor, keyboard and mouse ports of the computers you
are installing.
4. For stability, use one of the Cable Keepers (provided with
your purchase) to wrap around the KVM cable and stick it to
the desktop.
5. If you choose to use external power, plug the power adapter
into an AC power source, then plug the power adapter cable
into the unit’s Power Jack.
Note: The power adapter should be DC9V with the inside
positive and the outside negative:
6. Turn on the power to the computers.
Note: The CS-72M’s default is to link to the first computer
you turn on.
- 7 -
2003-08-01