Kenwood TK-2360/3360 - Manual (Page 17)


n
Emergency
press and hold this key to enter emergency mode . When
the transceiver enters Emergency mode, it will change to
the emergency channel and begin transmitting based on
your dealer settings .
Note: this function can be programmed only on the auxiliary
key .
n
Key lock
press this key to lock and unlock the transceiver keys .
While key lock is activated, you cannot use the Auxiliary,
Side 1 , Side 2, and microphone pF keys .
Note: You can still use the following key functions when Key
lock is activated: emergency, lone Worker, monitor, monitor
momentary, squelch off, squelch off momentary, key lock,
ptt + autodial, ptt + 2-tone .
n
lone Worker
press this key to toggle the lone Worker function on or
oFF . if the transceiver is not operated for the
pre-programmed time, it will emit a Lone Worker tone.
Subsequently, if no operation is performed while the tone is
emitted, the transceiver will enter Emergency mode.
n low Transmit Power
Press this key to change the transmit power on the current
channel to low power, to conserve battery energy.
n Monitor
press this key to deactivate qt or dqt signaling . press
this key again to return to normal operation .