Kenwood TK-2360/3360 - Manual (Page 23)

5
STATUS MESSAGE
you can transmit pre-programmed status messages by
pressing the keys programmed as Status 1 or Status 2 .
status messages are 2-digit codes ranging from 0 to 
(80 ~  are reserved for special messages) .
vOICE OPErATED TrANSMISSION (vOX)
VOX operation allows you to transmit hands-free. This feature
can be activated or deactivated by your dealer .
vOX GAIN lEvEl
1 connect a headset to the transceiver .
2 With the transceiver power off, press and hold the Side 1
key for 2 seconds while turning the transceiver power ON.
• The LED flashes red and green.
3 press the Side 1 key to increase the Vox gain level, and
the Side 2 key to decrease the level .
• the Vox gain can be adjusted from levels  to 0 and off .
4 While adjusting the level, speak into the headset
microphone to test the sensitivity level . (your voice is not
trasmitted during this test procedure .)
• When sound is recognized, the led lights orange .
5 press the PTT switch to save the setting.