Kenwood TK-2360/3360 - Manual (Page 24)

6
vOX OPErATION
1 connect a headset to the transceiver .
2 to transmit, simply speak into the microphone .
• the transceiver recognizes sound levels depending on the
VOX Gain level. If it is too sensitive, it will transmit when there
is noise in the background. If it is not sensitive enough, it will
not pick up your voice when you begin speaking.
3 When you finish speaking, transmission ends.
BACKGrOUND OPErATIONS
your dealer can activate a variety of transceiver functions to
perform without any additional operation on your part.
TIME-OUT TIMEr (TOT)
the time-out timer is used to prevent you from using a
channel for an extended duration . if you continuously transmit
for a preset time, the transceiver will stop transmitting and an
alert tone will sound. Release the PTT switch.
BATTEry SAvEr
The Battery Saver decreases the amount of power used when
a signal is not being received and no operations are being
performed .
lOW BATTEry WArNING
Low Battery Warning alerts you when the battery needs to be
recharged . your dealer can set an alert tone to sound and
the LED indicator to blink red when the battery power is low.
recharge or replace the battery pack at this time .