Maintenance and daily cleaning, Pull milk frother, Rinse milk system – Siemens TE503209RW User Manual

Page 15

Advertising
background image

11

de

en

4. Press the

h

button (11).

The

h

button (11) l ashes and the ap-

pliance now heats up for approx. 20

seconds. The display then shows

Pull

milk frother

.

5. Pull the milk frother (6) to open it.

¡

Risk of burns

Milk froth or warm milk comes out of the

milk frother (6) at high pressure. Splashes

of milk can scald. Carefully open the milk

frother (6). Do not touch the outlet (6c) or

aim it at anyone.

6. Close milk frother (6) by pushing it in.

Tip: For optimal milk froth quality, use cold

milk with a fat content of at least 1.5 % if

possible.

Important: Dried milk residue is difi cult to

remove, so the milk frother (6)

must be

cleaned with lukewarm water immediately

after use and rinse using the

Rinse milk

system

programme (see page 12).

Maintenance and daily

cleaning

¡

Risk of electric shock

Unplug the appliance before cleaning it.

Never immerse the appliance in water.

Do not use a steam cleaner.

● Wipe the outside of the appliance with a

soft, damp cloth.

● Do not use abrasive cloths or cleaning

agents.

● Always remove any limescale, coffee,

milk or descaling l uid residue immedi-

ately. Such residue can cause corrosion.

● Pull the drip tray (8c) with the coffee

grounds container (8b) forward and out.

Remove the panel (8a) and the grate

(8d). Empty and clean the drip tray and

coffee grounds container.

● Remove drawer (4) and clean.

● Remove the l oat (8e) and clean with a

damp cloth.

Do not put the following items in the

dishwasher: cover of the storage com-

partment (5c), drip tray panel (8a), l oat

(8e), drawer (4), brewing unit (5a).

Advertising