Electrical connection, Checking the water connection for leaks, Aligning the appliance – Siemens KA58NA45 User Manual

Page 41

Advertising
background image

41

Electrical connection

Do not use an extension lead or a
multiĆplug socket.
This appliance must be connected
to a permanently installed socket.
The plug to secure the appliance must
be freely accessible. Connect the
appliance to a 220 - 240 V / 50 Hz AC
current via a plug which has been
properly installed. The socket must be
fused with a 10 A fuse or higher.

If the appliance is to be operated in
a nonĆEuropean country, check on
the rating plate whether the indicaĆ
ted voltage and current type corresĆ
pond to the values of your mains
supply. The rating plate is situated
in the bottom leftĆhand side of the
appliance. Any necessary exchanĆ
ging of the mains lead should carĆ
ried out by a specialist electrician.

!

Warning!

Never connect the appliance to
electronic energy saver plugs
(e.g. Ecoboy, Sava Plug) or to power
inverters which convert the direct
current to 230 V alternating current
(e.g. solar equipment, power
supplies on ships).

Important!

When installing or changing the power
cord, attach a cord grip.

Checking the water
connection for leaks

S Switch on the appliance according to

the enclosed operating instructions.

S Remove water according to the

operating instructions. This will last
several seconds as there is still air in
the lines and water tank.

S Check all screwĆon water connecĆ

tions for leaks on the appliance and
on the water connection.

S After checking for leaks, pull out

the mains plug again and attach the
motor compartment cover.

Aligning the appliance

To ensure that the appliance functions
correctly, it must be set level with a
spirit level.

If the appliance is not level, water may
flow out of the ice maker, ice cubes
may be irregular or the doors may not
close properly.

S Place the appliance in the designated

location.

S Attach the enclosed base panel with

3 screws.

S To prevent the appliance from rolling

away, screw down the front feet until
they are positioned firmly on the floor.

S Rotate the feet until the appliance is

aligned exactly. Use the doors as a
reference point!

Freezer compartment door is deeper:

Refrigerator compartment door is
deeper:

en

Advertising