Kenwood K-821DV - Manual (Page 84)

K-821DV 84
Setting the Timer
K-821DV
To turn a timer off or on „
When the system is turned on, press the z [TIMER] key.
Press the power [ K] key to turn the power OFF.
The z [STANDBY/TIMER] indicator on the main unit lights orange.
If the indicator lights red, set the clock to the correct time. z
12 12
The setting changes each time you press the [TIMER] key.
PROG. 1 on PROG. 2 on
PROG. 1 and 2 on Timer off
1 lit 2 lit
1 2 unlit 1 2 lit
The z [STANDBY/TIMER] indicator will light red if there was a power
failure or the system was unplugged from the wall outlet for some
time. If this happens, set the system clock to the correct time again.
(See P.86)
To modify the program settings, reconfi gure the timer settings from the begin- z
ning.
When the system is in Standby mode, you can confi rm the timer setting (on or z
off ) for 5 seconds by pressing the [ F] key on the remote control.
B60-5815-08_01_GVT0295-001B_K-821DV_En.indb 84 B60-5815-08_01_GVT0295-001B_K-821DV_En.indb 84 10.1.25 4:56:42 PM 10.1.25 4:56:42 PM