Kenwood K-821DV - Manual (Page 86)

K-821DV 86
Set the system clock to the correct time.If the system clock time setting is not cor-
rect, the Program Timer will not start playback at the correct time.
Setting the System Clock
Set the time.
4 4
Select "TIME ADJUST".
Press the [ C] or [D] key.
2 2
Set the day of the week.
Press the [ A] or [B] key.
3 3
Use the [ A] or [B] key to set the
"hour".
Use the [ A] or [B] key to set the
"minute".
Press the [ENTER] key.
Press the [ENTER] key.
The currently set day of the week and time are displayed. z
If you make a mistake, repeat the procedure from the beginning. z
If there is a power failure or the system is unplugged from the wall outlet for z
some time, set the time again.
Pressing the [ z F] key on the remote control while the system is in the Standby
mode will display the time for 5 seconds.
Time display diff ers (24 Hour clock display or AM/ PM display) according to area. z
Press the [ENTER] key.
Press the [ENTER] key.
Press the [MODE] key.
1 1
B60-5815-08_01_GVT0295-001B_K-821DV_En.indb 86 B60-5815-08_01_GVT0295-001B_K-821DV_En.indb 86 10.1.25 4:56:43 PM 10.1.25 4:56:43 PM