Kenwood K-821DV User Manual
Page 94
K-821DV
94
K-821DV
System Settings
Setting item
Description
DOWN MIX
Select the signal based on the external device connected to the [DIGITAL OUT] terminal of
the system. This setting is available when “PCM ONLY” is selected for “DIGITAL AUDIO OUT”.
DOLBY SURROUND:
Used for devices that have a built-in Dolby Pro Logic decoder.
STEREO:
Used for other devices.
D.RANGE COMPRESSION
This function corrects the diff erence in quality between large and small sounds played at
low volume. (This function is valid for DVDs recorded in Dolby Digital format.)
AUTO:
D.RANGE COMPRESSION automatically works when needed.
ON:
D.RANGE COMPRESSION always works.
HDMI AUDIO OUT
You can select whether or not the audio signal from the [HDMI MONITOR OUT] terminal is
output.
ON: The audio signal from the [HDMI MONITOR OUT] is output.
OFF: The audio signal from the [HDMI MONITOR OUT] is not output.
NOTE
Depending on the connected TV, when “HDMI AUDIO OUT” is set to “ON”, only PCM sig-
z
nals can be output via an HDMI cable.
Relation between DIGITAL AUDIO OUT settings and output signals
Relation between DIGITAL AUDIO OUT settings and output signals
Type of disc/fi le to play
DIGITAL AUDIO OUT Settings
STREAM/PCM
DOLBY DIGITAL/PCM
PCM only
DVD Video with 48kHz,
16/20/24-bit linear PCM
DVD Video with 96kHz
linear PCM
Linear PCM with 48kHz, 16-bit stereo
DTS DVD Video/DVD
Audio
DTS bitsteam
Linear PCM with 48kHz, 16-bit stereo
Dolby Digital DVD Video
Dolby Digital bitstream
Linear PCM with 48kHz, 16-bit
stereo
CD/VCD/SVCD
Linear PCM with 44.1kHz, 16-bit stereo
Linear PCM with 48kHz, 16 bit
DTS CD
DTS bitstream
Linear PCM with 44.1kHz, 16 bit
MP3/WMA/WAV/MPEG1/
MPEG2 fi les
Linear PCM with 32/44.1/48kHz, 16 bit
About the
z
[DIGITAL OUT] terminal: 20 or 24 bit signal may be output for some DVDs that have no copyright
protection setting.
B60-5815-08_01_GVT0295-001B_K-821DV_En.indb 94
B60-5815-08_01_GVT0295-001B_K-821DV_En.indb 94
10.1.25 4:56:44 PM
10.1.25 4:56:44 PM