Call settings, Adjusting the call settings – Avaya Tandberg 150 MXP User Manual
Page 13
D 14126.01
01.2008
13
TANDBERG 150
MXP
USER GUIDE
TANDBERG 150
MXP
USER GUIDE
Open the
Call Menu
using any of these five methods:
1
2
3
abc
def
4
5
6
jkl
mno
ghi
7
8
9
tuv
wxyz
pqrs
0
a/A
Press the green
Call
key
Press any digit
0
–
9
Press the
Loudspeaker
key
Press the
Headphone
key
Lift the optional handset.
Use the
Cursor
keys to navigate to
Call
Settings
Press
OK
or press the
Right Cursor
key again to produce
the submenu.
Adjust settings as required.
If you want to change the
Default Call
Settings
, make the required changes
to the
Call Settings
and navigate to
Set as Default
. Press
OK
to save
these settings, which now will be the
default settings for all future manually
dialled calls.
Navigate to this icon and
press
OK
to leave menu
undoing any changes
– including any new default
setting you may have
introduced.
Navigate to this icon
and press
OK
to leave
menu putting changes
into effect.
Bandwidth
determines the
quality of the video picture. The
system will, by default, connect
using
Auto Bandwidth
. This
means that the system will
establish a connection using a
proper bandwidth for your call.
The typical bandwidth used
for IP calls is 384 kbps. When
bandwidth is set to
Auto
, the
unit will default to 384kbps.
The
Net
alternatives are:
H.323 and SIP.
If a gatekeeper is present, you may
place IP-calls using “telephone-style”
numbers (an E.164 alias), according
to the numbering plan implemented
in the gatekeeper. The gatekeeper will
then translate the dialled number into
an IP-address (see H.323 Settings
in the Adminstrator’s Guide for more
information about gatekeepers).
Adjusting the Call Settings
Call Settings