Audio2000's AKJ780D - Manual (Page 12)

Rear Panel
Descriptions and Functions
D
- Connect AC MAIN POWER CORD from the wall outlet to this terminal.
jacks - These XLR jacks are for connecting MASTER output to an
external device with balanced cables.
- These jacks are for connecting microphones via BALANCED
XLR-type microphone cables.
10.AC~IN TERMINAL
11.
1 .BAL ANCED AUDIO OUTPUT
17.BAL ANCED MIC 1-2 INPUT (XLR)
12.
13.AV 1 / 2 INPUT
14.VIDEO OUT 1-2 (RC A)
15.AUDIO OUT 1-2 (RC A)
D
D
jacks - These jacks are for connecting AUDIO/VIDEO OUTPUT from external AV sources.
Connect RCA-style AV cables (R, W, Y) from these jacks to the AV OUTPUT jacks on your external AV devices.
- These jacks are for connecting the 's VIDEO OUTPUT to TV
or DISPLAY devices. Connect RCA-type patch cables from these jacks to the VIDEO INPUT jacks
on the connecting TV or display devices.
- These jacks are for connecting the AUDIO OUTPUT to an amplifier,
recording or mixing devices. Connect paired RCA-type patch cables from these jacks to the appropriate
INPUT jacks on external audio devices.
6
AC POWER
PRE OUT
outlet - This outlet provides AC POWER to an external device.
jacks-Connect one end of ¼-inch cables to the left and right PRE-OUT jacks on the AKJ780 .
Connect one end of the ¼-inch cables to the left and right AUDIO/LINE/AUX INPUT jacks on the
external device.
jacks AKJ780
jacks AKJ780
jacks
Note: Do not connect any device with a power consumption level higher than 200W.
12 13 14
10
16
17
15
23
0
PRE-OUT
Serial Number
Made in P.R.C.
11