Audio2000's AKJ780D - Manual (Page 30)

1. SPEAKER SETUP
1.1 DOWNMIX
1.2 FRONT SPEAKER
1.3 CENTER SPEAKER
1.4 REAR SPEAKER
1.5 SUBWOOFER
2. SPDIF SETUP
Opens up the Speaker Setup page
LT/RT - Sound output is divided with the Left coming
out of the Left speaker and the Right coming out of the
Right speaker.
STEREO - Sound output is in Stereo Mode.
V SURR - Virtual Surround Sound
5.1 CH - For 5.1 Channel surround sound
Set this based on the size of your front speaker
Set this based on the size of your front speaker
OFF: If you do not have a center speaker
OFF: If you do not have a rear speaker(s)
ON: If you have a subwoofer
OFF: If you do not have a subwoofer
SPDIF OFF: No digital audio output
SPDIF/ RAW: Digital audio output in RAW format. Normally used for DTS and Dolby Digital 5.1 signals
SPDIF/ PCM: Digital audio output in PCM format. Normally used for audio CD signal
?
?
?
?
?
?
?
?
?
?
?
?
?
Set this based on the size of your rear speaker
DVD System Setup Menu
- - Audio Setup Page - -
Audio Dolby Video Preference General
Speaker Setup
S p d i f S e t u p
CH EQ Setup
3D Process
Stereo - Left and Right in true stereo
L - Mono - Left channel only (no vocals)
R- Mono - Right channel only (no music)
Mix-Mono - Virtual stereo
Sets the linear compression ratio to get different
compression results.
Optional settings: Off, 1/4, 1/2, 3/4, Full.
3.
4.
4.1
4.2
1. DUAL MONO
2. DYNAMIC
EQ Type Choose the EQ type that is most similar to the kind of music you are playing
Turn PRO LOGIC II surround sound on and off. When it is
turned on, more options are available
Select a specific reverb sound or turn reverb off
?
?
?
3D PROCESS
PRO LOGIC II
REVERB MODE
Note: Can also be changed using the L/R button
on the remote control
●
●
●
●
CH EQ SETUP
Dolby Digital Setup
Audio Dolby Video Preference General
- - - - Dolby Digital Setup
Dual Mono Stereo
Dynamic L-Mono
R-Mono
Mix-Mono