Audio2000's AKJ780D - Manual (Page 15)

TV TV
D
D D
D
D
to power the
What you will need
AC power cord (included)
Surge-protector (recommended) or a power outlet
1.Connect the AC end of the power cord into the
AC input on the rear panel of the D.
2.Connect the other end to a surge-protector
or any available power outlet.
What you will need
RCA-style video cable (included)
TV's video monitor h with an RCA video input (not included)
D
D
Connecting to the AC Outlet
Connecting to a TV / Video Monitor with an RC A Input
1.
2.
3.
●
●
●
●
Note: Before turning on the power, make sure the red voltage selector [Fig. A] is set to the proper voltage.
It should be set to 115V for North America and 230V for most European countries. Make sure
you know the proper voltage for your region before turning on the
D.
One
One or two
or s eac
Connect one end of the RCA video cable to the yellow Video Out on the rear panel of the .
The has two RCA-type VIDEO OUTPUT jacks for connecting to TVs or monitor devices.
Both VIDEO OUTPUTS can be connected simultaneously.
Connect the other end of the RCA video cable to the Video Input on a TV / video monitor
Since the AKJ780 contains built-in power amplifiers, speakers, DVD/CDG/CD player, USB player, and SD
card player, the AKJ780 can be used as a self-contained sound system. Furthermore, the AKJ780 contains
various audio video outputs to allow the AKJ780 to be connected to multiple TV sets, external sound
systems, and/or multiple sound effect devices. The following content demonstrates the procedures for
connecting the AKJ780
to the AC outlet and other audio video devices.
AKJ780D
AKJ780
AKJ780
AKJ780
AKJ780
11
5
VOLTAGE SELECTOR
[Fig. A]
Basic Connections