Phottix Hector 9HD - Manual (Page 4)

4
Tip
Turn off all devices (cameras and Phottix Hec-
tor 9HD) when connecting and disconnecting
them to one another.
1. Charging the battery
1.Align a battery with the Battery Port area on the
Battery Charger. 2.Plug the charger into Mains power.
3.The Status LED on the Charger will turn red when
the battery is charging. 4.The Status LED on the
Charger will turn green when charging is complete.
2. Inserting Batteries
1.Align a charged battery with the Battery Port
area on the back of the Hector 9HD.
2.Push the battery down, locking it in place.
3. Using the Power Adapter
1.Plug Power Adapter into Mains power.
2.Connect the other end of the Adaptor to the
Mains Power Port on the Hector 9HD.
4. Turning ON/OFF
The Battery On/Off Switch on the back of the Hec-
tor 9HD powers off all functions when set to the Off
position. If left on with a battery in place and the LCD
switched off the Hector 9HD will continue to use
battery power. If you are not using the Hector for an
extended period of time move the Battery On/Off
Switch to the off position.1.After attaching the bat-
tery, move the Battery On/Off switch to On.2. When
finished using the Hector 9HD move the Battery On/
Off switch to Off.
5. Setting Video Source
You must select the video input source when using
the Hector 9HD
1.Press the Source button to open the source se-
lection menu. 2.Press the Source button to cycle
through the available input options. 3. Leave the
selection highlighted - the Hector 9HD will auto-
matically switch that input source.