MagTek MICRbase - Manual (Page 14)

MICRbase, Setup Program for MICR Readers
6
Configure
Contains options needed to design, upload, and download configurations for the MICR Reader.
These options are described in Section 5 for the RS232 interface and Section 6 for the Wedge
interface.
Help
The selections available in this menu are as follows:
SELECTION DESCRIPTION
About MICRbase Lists the Program Version, Part Number, and Part Number Revision of the
MICRbase program
ASCII Table Displays a complete list of ASCII characters and their decimal values
TOOLBAR
The toolbar buttons are as follows:
New
Allows start of a new configuration from default settings or the current configuration of
an attached MICR Reader.
Open
Opens previously saved MICR configuration files (.mic extension).
Save As
Saves the current configuration to the current file.
Cut, Copy, or Paste
Standard Windows 95 buttons for cutting, copying, and pasting.
Print
When clicked, Prints the current configuration.
Help
Lists the Program Version, Part Number, and Part Number Revision. This menu also
includes a table of ASCII characters and decimal equivalents.
STATUS BAR
When the cursor points to a Toolbar button, the Status Bar describes the function.