MagTek MICRbase - Manual (Page 37)

SECTION 6. OPTIONS FOR WEDGE INTERFACE
This section describes the aggregate options in the Configure dialog box for two MICR Type
(Options) Wedge (Subset), and Wedge (Fullset).
Figure 6-1 is the dialog box for the Wedge (Subset), and Figure 6-2 is for the Wedge (Fullset).
The shaded areas in the dialog boxes are for showing status or are buttons for functions. The
unshaded areas are either check boxes, data boxes or drop down menus.
The menus, buttons, and boxes are described below. The applicable Wedge MICR Type
(Options) are specified in the title of the description.
MICR Type (Options) – Subset, Fullset
The five MICR Types are listed in this drop-down menu. Select the one that matches the MICR
Reader connected to the PC. When a new MICR Type is selected, the current options will be
replaced with the appropriate default options. As a reminder to save the current configuration,
the dialog box shown in Figure 6-3 will appear. There are two sets available for the Wedge
interface:
• Wedge (Subset) – must be used for older revision Wedge MICR readers that do not support
the Flexible Format feature and 3-Track MSR.
• Wedge (Fullset) – must be used for newer revision Wedge MICR readers that support the
Flexible Format feature or 3-Track MSR.
Last Configuration Source – Subset, Fullset
This box indicates where the current settings came from. There are three sources from the drop-
down menu: Upload, File, and Default. The Default Settings are shown here.
Download Option – Subset, Fullset
This drop-down menu selects what is to be downloaded to the MICR; either everything specified
in the dialog box (All) or just the format information (Only Format/Flex).
29