Important safety information 2, Parts and components, What’s in the box – Wagner Project Sprayer User Manual

Page 3: Important safety information, Grounding instructions

Advertising
background image

3

English

Important Safety Information

·

Read all safety information before operating

the equipment. Save THeSe InSTRUCTIOnS.

Grounding Instructions

This product must be grounded. In the event of an electrical short

circuit, grounding reduces the risk of electric shock by providing an

escape wire for the electric current. This product is equipped with a

cord having a grounding wire with an appropriate grounding plug.

The plug must be plugged into an outlet that is properly installed

and grounded in accordance with all local codes and ordinances.

WaRnInG - Improper installation of the grounding plug

can result in a risk of electric shock.

If repair or replacement of the cord or plug is necessary,

do not connect the green grounding wire to either flat blade

terminal. The wire with insulation having a green outer surface

with or without yellow stripes is the grounding wire and must be

connected to the grounding pin.

Check with a qualified electrician or serviceman if the grounding

instructions are not completely understood, or if you are in doubt

as to whether the product is properly grounded. Do not modify

the plug provided. If the plug will not fit the outlet, have the proper

outlet installed by a qualified electrician.

This product is for use on a nominal 120 volt circuit and has a

grounding plug that looks like the plug illustrated below. Make

sure that the product is connected to an outlet having the same

configuration as the plug. No adapter should be used with this

product.

Grounded Outlet

Grounding Pin

Cover for grounded outlet box

What’s in the Box

(e)

(f)

(g)

(a)

(b)

(c)

(d)

(6)

(5)

(4)

(3)

(2)

(1)

(k)

(i)

(m)

(j)

(l)

(h)

a) Sprayer assembly

b) Spray tip

c) Suction tube with filter

d) Material container

e) Flow control knob

f) Trigger

g) Pump assembly

1) Locking nut

2) Atomizer valve

3) Pump housing ring

4) Pump housing

5) Spring

6) Piston

h) Dual hose fitting

i) Quick Flush lid

j) Remote suction hoses

k) Container clip

l) Oil lubricant*

m) Cleaning brush

* Included in some models.

Advertising