Siemens TS45359 - Manual (Page 13)

13
5. Mains cable
6. Steam hose
7. “Energy Saving” button (green)*
8. Display
9. Illuminated main power button (red)
10. Iron secureLock system
11. Housing with internal steam generator
12. “calc’nClean Plus” scale collector
13. Steam release button
14. Steam release button “pulseSteam” *
15. Iron pilot light
16. Soleplate
17. Fabric protection soleplate cover*
* Model dependent
“auto” function
This steam station has a unique “auto” function. When
switching on the appliance it automatically sets the
“auto” temperature setting and “auto” steam setting,
which are suitable for all fabrics that can be ironed. The
“auto” function prevents clothes from being damaged
due to an unsuitable temperature being selected.
The “auto” function does not apply to fabrics that
cannot be ironed. Please check the garment care
label for details or try ironing on a part of the cloth not
visible normally.
How to use the steam station
1. When the steam station is plugged in and main power
button set to the “on” position (button illuminated),
the display (8) lights up and shows all icons for 2
seconds.
2. After that time, the appliance shifts automatically
to the “auto” settings the icons will flash until the
temperature and steam settings are reached:
3. Temperature settings:
Temperature level selection touch icon is
used to change the temperature of the iron
soleplate, if auto setting is not required
Automatic temperature selection of the iron
soleplate. It is suitable for any type of fabric
which can be ironed on this setting
Indicates that the selected ironing temperature
is suitable for silk and synthetic fabrics.
Indicates that the selected ironing temperature
is suitable for wool.
Indicates that the selected ironing temperature
is suitable for cotton and linen.
To change the temperature of the soleplate, touch the
icon on the display (8) repeatedly. The iron runs
through the following cycle:
The selected icon flashes until the corresponding
temperature is reached.
The steam setting is automatically selected for each
ironing temperature according to the following cycle:
The selected icon flashes until the pressure
corresponding to each steam level is reached. Steam
is now ready to be released by pressing the steam
release buttons (13 or 14*).
4. Steam settings:
Steam level selection touch icon is used to
change the amount of steam coming out of the
soleplate, if auto setting is not required
Automatic selection of the steam flow.
en