Asus DiGiMatrix AB-V10 - Manual (Page 136)

5-18 Chapter 5: BIOS Information
Display Select [CRT+DVI]
This field allows you to set the display output for the DiGiMatrix system.
Configuration options: [CRT+DVI] [CRT+TV]
TV Type [S-Video]
This item allows you to select the type of TV that connects to the
DiGiMatrix system. Set to [S-Video] if you will connect a TV with S-Video
port. Set to [Hi-Vision 1080iTV] if you will connect a high-definition TV.
Configuration options: [S-Video] [Hi-Vision 1080iTV]
TV Out Function [NTSC]
This item allows selection of the TV output standard. Select [PAL] or
[NTSC] depending on your location. Configuration options: [NTSC] [PAL]
USB Function [Enabled]
This parameter allows you to enable or disable the southbridge USB 1.1
controller. Configuration options: [Enabled] [Disabled]
USB 2.0 Function [Enabled]
This parameter allows you to enable or disable the southbridge USB 2.0
controller. Configuration options: [Enabled] [Disabled]
Before selecting [CRT+DVI] as display output, set the TV Type item to
[S-Video] and the TV Out Function to [NTSC].
An S-Video TV connected to the DiGiMatrix receives no signal if this item
is set to [Hi-Vision 1080iTV].