Asus DiGiMatrix AB-V10 - Manual (Page 28)

2-10 Chapter 2: Basic Installation
2.7 Replacing the top cover
After installing the components, follow these instructions to replace the top
cover.
1. Position the front edge of the top cover at least two inches from the
front panel cover. Fit the top cover tabs with the chassis rail and the
front panel cover tabs.
2. Lower the rear edge of the top cover as shown.
3. Push the top cover slightly toward the front panel until it fits in place.
4. Secure the top cover with two screws that you removed earlier.
3
4
3
4
1
Tabs
2