Asus DiGiMatrix AB-V10 - Manual (Page 24)

2-6 Chapter 2: Basic Installation
2.5 Installing a CPU
The P4SQ motherboard comes with a surface mount 478-pin Zero
Insertion Force (ZIF) socket. This socket is specifically designed for
Intel
® Pentium ® 4/Celeron processor.
To install a CPU:
1. Loosen the CPU fan screws.
2. Disconnect the CPU fan cable from the CPU fan connector on the
motherboard.
3. Lift the CPU fan.
3
1
2
8. Secure the metal cover with screws that you removed earlier.
8
The DiGiMatrix system comes with a pre-installed proprietary CPU fan. Do
not replace the CPU fan.