iPazzPort KP-810-10A - Manual (Page 6)

Star ting W ireless Handheld Keyboard
Starting up this hardware and application is simple.
1. Plug the USB adaptor into any available USB port, LED on USB receiver will light on for
about 3 seconds then flash that means iPazzPort searches for pairing .
2. Power on the Wireless Handheld Keyboard by moving the slide switch to on as shown
by arrow 10.
3. LED 3 will flash one time then go out, this is normal. Please press any keys LED 3 will
flash indicating proper operation of the unit and transmission between the USB adaptor
and iPazzPort.
If you find that LED 3 is blinking rapidly please check the following two items:
1. Check your distance between the Keyboard and the computer. Is it within 30'?
2. Check to see if you have plugged in the USB adaptor to your computer correctly.
4. The Wireless Handheld Keyboard has a battery saving feature.
This feature puts the device into sleep mode if you do not use it for a long time.
You can wake up the unit by pressing any key for one second.
5 Arrow 14 points to the Fn key.
In order to bring users more convenience, the Wireless Handheld Keyboard also provides F1,
F2,F3...F12 which operate like those keys on the standard keyboard. Please press Key Fn
together with the key you want to operate them, but if you only press FX on the Wireless
Handheld Keybaord , that will make no sense. The following keys need to be used with key
Fn: F1,F2...F12, combo key of CTRL+ALT+DEL, Ins, Prt Scr, Home, End, Del, and Touchpad
rotation key( see arrow 22)
6. Arrow 13 points to Ctrl+Alt+Del key
As we know, in many occasions we need to use keys: Ctrl+Alt+Delon standard keyboard when
operate computer, such as restart system, lock users, terminate applications.... But now with
Wireless Handheld Keyboard you only press key Fn together with key “Enter” to complete
your mission.
Page 4 of 10