iPazzPort KP-810-10A - Manual (Page 7)

6. Arrow 22 points to key of touchpad rotation.
As we know, some times, we want to operate the wirelss keyboard vertically, and some times
horizontally, when operation direction is rotated from vertical to horizontal, but touchpad will not
for example, if the operate direction is rotated, when you slide your finger on the touchpad
vertically, and the mouse cursor on the screen of computor will move horizontally, so please
press key Fn together with key of touchpad rotation to rotate the touchpad, this way, mouse
curosr will move in corresponding direction.
8. If you wish to operate this Wireless Handheld Keyboard in a darkened room then you
will want to use the Backlight Keyboard feature. In order to activate the Backlight feature
please press backlit button indicated by arrow 5 to turn on/off the backlight.
9. The Touch Mouse Pad (TMP) is quite versatile. To create input with the TMP place your
finger on the pad. Just move your finger on the TMP as though you were using your mouse
pad. Watch the mouse move to where you want it, and then use the keyboard for whatever
action you desire. You can draw patters using the TMP if you have installed MS Paint ,
ScreenPen or other Paint software.
10. Wireless Handheld Keyboard has an option of built-in Laser Pointer, which provide
an enhanced tool for your presentation, training, conference. press the Laser Pointer button
indicated by arrow19 to operate it, you can use this feature whenever the unit is on or off.
Page 5 of 10
7. When the backlit light up without any operation , this indicates your battery voltage has a low
charge and needs to be recharged. The WirelessHandheld Keyboard is equipped with a
re-chargeable battery. We have supplied you with a USB cable, which is plugged into a vacant
USB slot on your computer and the bottom of the Wireless Handheld Keyboard, as indicated
by arrow 21 above. During charging LED1 will light up with a steady on. When fully charged
LED 1 will go out and LED2 will on, unplug the WirelessHandheld Keyboard from the USB cable
and LED2 will go out too..