Connecting batteries, Requirements of dc input power source, Series connection – Samlex America SAM-3000-12 User Manual

Page 11

Advertising
background image

8 | SAMLEX AMERICA INC.

SAMLEX AMERICA INC. | 9

SECTION 4 |

Installation

3. Do not use with Positive Grounded Electrical Systems (the majority of modern automobiles,

RVs, trucks and boats use Negative Grounded Electrical Systems).

4. Observe correct polarity when connecting the DC input terminals of the inverter to the

battery. Connect Positive of the battery to the Positive input connector of the inverter and
the Negative of the battery to the Negative input terminal of the inverter. Reverse polarity
connection will result in a blown fuse and may cause permanent damage to the inverter.
Damage due to reverse polarity is not covered under warranty.

requirements of Dc input power Source

approx. Dc input current required by inverter = power consumed by the ac Load in
Watts ÷ 10.

DC input currents at Continuous Rated Power Output are shown (Table 4.1 below):


table 4.1 Dc input current

model

rated input current

SAM-1000-12

100A

SAM-1500-12

150A

SAM-2000-12

200A

SAM-3000-12

300A

12VDC input to the inverter should be fed from a 12V Battery System or from a 12.5VDC
to 15VDC Regulated DC Power Supply. If a DC Power Supply is used, its output current ca-
pacity should be more than 2 times the maximum DC input current drawn by the inverter.
further explanation of operation is based on Dc input power from a 12V battery. It is
recommended that Deep Cycle Type Batteries are used. For detailed technical information
on types, construction, specifications, sizing, connections and charging / discharging of
Lead Acid Batteries, please read online White paper titled “Batteries, chargers and
alternators” at www.samlexamerica.com under Support/White papers.

connecting Batteries

Series connection

Fig. 4.2 Series Connection

6V Battery

6V Battery

12V Battery

12V Battery

12V Battery

12V Battery

6V Battery

6V Battery

6V Battery

6V Battery

12V String 1

12V String 2

Battery 1

Battery 3

Battery 2

Battery 4

Battery 1

Battery 3

Battery 2

Battery 4

Battery 3

Battery 4

12V

Inverter/

Charger

12V

Inverter/

Charger

Cable “A”

Cable “B”

Cable “A”

Cable “B”

Cable “A”

Cable “B”

6V Battery

Battery 2

6V Battery

Battery 1

24V

Inverter/

Charger

11002-SAM-1000-1500-2000-3000-12-0814.indd 11

14-08-12 9:59 AM

Advertising
This manual is related to the following products: