Kinivo M2 Bluetooth 2.1 Speaker system with NFC pairing - Manual (Page 12)

Kinivo M2 Bluetooth 2.1 Speaker System 12
Make sure the speaker is not connected via Bluetooth to any device. Activate
the NFC functionality in your smartphone or tablet. Place the device on the
NFC mark on the top side of the subwoofer and keep it there till the speaker is
paired and connected. Now you can remove the smartphone or tablet and start
playing your music.
7. Auxiliary Input
Use the included 3.5mm to RCA cable in order to connect the speakers using
wired input (instead of Bluetooth). Just connect the RCA side to speaker’s
input ports and connect the 3.5mm side to any audio source. Press the Source
button to toggle between Aux Input and Bluetooth. The LED on the back of the
subwoofer will display red when the Aux Input is active.
8. lEd Indication
Status Bluetooth Status lEd
Bluetooth disconnected Slow blinking blue
Bluetooth Pairing mode Fast blinking blue
Bluetooth connected Steady blue
3.5mm Aux Input Steady red