Kinivo M2 Bluetooth 2.1 Speaker system with NFC pairing - Manual (Page 15)

15 Kinivo M2 Bluetooth 2.1 Speaker System
2. Where can I find Windows drivers for the M2 speaker?
The M2 speaker does not have external drivers. The drivers are provided
by the Bluetooth adapter with A2DP support (see compatibility list). If you
are experiencing driver issues with the speaker on a computer, update your
Bluetooth adapter drivers to the latest version.
3. how many Bluetooth connections will the M2 speaker
remember?
The M2 will remember up to eight previous Bluetooth connections. When
the M2 is powered on, it will automatically connect to the last device it was
connected to. If the last device isn’t found, it will connect to the second last
device, and so on.
4. how can I switch from one music source to other?
Make sure that new device is already paired to the speaker. If not, you can put
the speaker in pairing mode and pair with the new device. If the speaker has
been paired with both devices already, then simply disconnect the speaker
from the first device by going to the first device’s bluetooth configuration (you
might have to disable its bluetooth temporarily). Now open the bluetooth
configuration of the second device and “connect” to the speaker.
For example, while going from iPhone to a computer:
1. Disconnect the speaker from iPhone’s Bluetooth configuration. You may
have to disable iPhone’s Bluetooth to achieve this.
2. Now go to your computer’s “Show Bluetooth devices” and click on Connect.
5. help! I’m unable to use to the speaker. What should I do?
Please view the Troubleshooting section. If you are unable to find a solution you
can contact Kinivo Support via email at [email protected].