ACR Electronics 2662 - Manual (Page 41)

4.3 Entering Ship Settings
Select from the Main Menu “4. Ship Settings” This option requires the USER password. The
default password from the factory is mentioned on your AIS display at the protection foil.
Please see the appendix in your User Manual for additional password information. Enter
Password and use the up and down arrows to edit Ship Settings then press Enter or the
numeric reference on the keypad to select and edit.
Save after editing.
Main Menu Example:
Select Ship Settings and press M5 [Enter]. Enter User Password and Continue.
Ship Settings Menu Example:
Select and enter Call Sign (ATIS).
Select and enter Ship Name.
Enter external GPS Antenna Position
Enter internal GPS Antenna Position
Enter ship len and beam in [dm]
N 1 o 23' E 0 o 16' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----| +- 8. Graphical Display Settings
|
Displ|
----------------------------------------
NUM|Select->| | |<-Back
N/A N/A |1> N/A|2> N/A|3> N/Anm
*********** Convoy Settings ************
Call Sign:OEZ1234 /\ +
ShipName :INLAND SHIP / \|
Ref.Points ext int | |
A: 200m 220m | A
B: 20m N/A | |
C: 10m 10m | +--|
D: 33m 33m | | B
Len (A+B): 220m 220m | | |
Beam(C+D): 43m 43m +-C-+D-+
Len [dm]: 2199dm
Beam [dm]: 429dm
>>> DATA OK. PRESS M5 TO SAVE DATA <<<
----------------------------------------
| Save | | | Back
Y1-03-0212H 37