ACR Electronics 2662 - Manual (Page 45)

Select Submenu 2 “Cargo/Voyage Settings” with cursor button [Up] & [Down] or by pressing
Nr. 2 on the keyboard.
Toggle the values for the ERI ship type (see section 7.1), the hazardous cargo by the
number of Blue Cones [0-3, B-Flag, Default/Unknown], and the loaded / unloaded status Un/
Loaded [Loaded, Unloaded].
Save the new settings by pressing [Save], and return to the Main Menu Screen by pressing
[Exit]. The ERI ship types, which are used in Inland message 10, are automatically converted
to the IMO types which are used in IMO message 5 (refer to section 7.1.).Press [Back] to
return to the Main Menu without saving any changes.
Select Submenu 3 “Persons on Board” with cursor button [Up] & [Down] or by pressing Nr. 2
on the keyboard.
Note: The total number of persons on board will be calculated
automatically. In “High Seas”
mode this sum will be used for the AIS messages.
How to use this menu to transfer PoB – information will be described in detail in the User Manual.
N48^12' E 16^26' |1> N/A|2> N/A|3>0.00nm
******** Cargo/Voyage Settings *********
ERI ship type :<Vessel, type unknown>
SOLAS shiptype: N/A or no ship
Cargo type : - - -
Blue cones : Default/Unknown
(Un) Loaded : Default/Unknown
----------------------------------------
| Save | | | Exit
N 1 o 18' E 0 o 12' |1>0.01|2>1.30|3>1.80nm
************* PoB Settings *************
Crew Members:0-254 (255 = unknown = default)
Passenger :0-8190(8191= unknown = default)
S. Personal :0-254 (255 = unknown = default)
--------------------------
Total :nnnn Members
M6: Send addressed PoB Message
M7: Broadcast PoB Message
----------------------------------------
Num| Save |Addressed |Broadcast | Exit
Y1-03-0212H 41