Chatsworth Products Additional Power Distribution Units - Manual (Page 25)

CPI PDU User Manual Rev. 10.0. June 28, 2010
23
On a Controlled PDU, the PDU State screen will also include a check box to turn power
on (checked) or off (not checked) for each switched receptacle and an [R] (reset) button
to cycle power to each switched receptacle that is on.
The amount of current use by receptacle is also displayed. The PDU may include extra
receptacles that are not controlled. These receptacles are not listed under the branches,
but the total amount of current will include current use by all receptacles on the PDU.
Note: The example above is from a three-phase Controlled PDU with receptacles
grouped into three phase groups (Branch X, Y, and Z). On a single-phase PDU, the
receptacles would be grouped into one (Branch) or two circuit segments (Branch A and
B).
Click the [OK] button to exit to the main menu.