Chatsworth Products Additional Power Distribution Units - Manual (Page 38)

CPI PDU User Manual Rev. 10.0. June 28, 2010
36
Specifications
Dimensions: Varies by model.
Weights: Varies by model.
Altitude:
• Operating: 0 to 10,000 ft (0 to 3048 m)
• Non-operating: 0 to 30,000 ft (0 to 9144 m).
Audible Noise: Less than 60 db LpA (Sound pressure level at bystander position)
The above noise level is not for office environment. It is for dedicated Datacenter
environment.
Heat Dissipation: 90 BTU/hr maximum.
Shock and Vibration:
• Operating: 5 to 500 Hz, 0.5 g (0.1 octave/min)
• Non-operating: 5 to 100 Hz, 1 g (0.1 octave/min); 100 to 500 Hz, 1.5g (0.2
octave/min); 500 to 1000 Hz, 1.5 g (0.2 octave/min)
Electrical
• Grounding: Chassis grounded.
• Input Voltage: 110 to 240 VAC, varies by model
• Input Current: 20 or 30 Amperes
• Line Frequency: Single- or three-phase, 50 or 60 Hz.
• Output Power Capacity: 10, 15 or 20 Amperes, varies by model
• Configurable Power: 10, 15 or 20 Amperes, varies by model
• Nominal Output Voltage: 110 or 240 VAC, varies by model
• Output Voltage distortion: same as input
• Output Frequency: 50 or 60 Hz (same as input)
• Waveform type: same as input
• Output Connector Types: Varies by model
Temperature:
• Operating: 32° (0°C) to 104° (40°C)
• Storage: -4° (-20°C) to 140° (60°C)
Humidity:
• Operating: Non-condensing, 10 to 90 percent.
• Storage: Non-condensing, 5 to 95 percent.
Local Connection:
• RJ11connector: Environmental probe connection
• RJ45 connector: Serial connection
Remote Connection:
• Network: 10/100 RJ45
• Network Protocol: TCP/IP