Campbell Scientific CC640 Digital Camera - Manual (Page 39)

CC640 Digital Camera
• Delete-File <Station> <Filename>
o Deletes a file stored in the datalogger. This is currently not supported
on the CR510, CR10X, or CR23X datalogger.
• Retrieve-File < Station > < Filename > <Output Filename >
o This should be the only command required to collect images with the
datalogger. The files sent to the CR10X by the camera have a unique
filename by using a counter. To retrieve all images in memory simply
use the wildcard character * for the JPG files:
• Retrieve-File <Station> *.JPG
o This will retrieve files that match the DOS type name entered.
o Other options for Retrieve_File include Force and NoDateCheck
• Force: Will collect a file even if a file with the same name and date have
already been collected.
• NoDateCheck: Will collect a file with the same name only if the date is
different.
14.2 Using LoggerNet File Control
Images that are in the dataloggers memory can be viewed or collected on
demand by using the File Control feature that is available under the Tools
menu of the connect screen. Using the file control can also be useful for
debugging purposes.
In the case of the CR510, CR10X, or CR23X datalogger only the CPU device
exists where files can be stored. For the CR800, CR850, CR1000, and CR3000,
devices can include the CPU, USR and the CRD (CompactFlash module). The
devices show up in the left hand side of the File Control panel. To view files of
a certain device simply click on the desired device listed in the panel.
FIGURE 12. LoggerNet Screen
33